Tanning beds are a great way to make sure that you are always looking good by keeping your tan topped up. Although they are fairly maintenance free they do require the occasional repair. The usual things that you might have to replace are the tanning bed bulbs. These are how the tanning bed produces the rays that give you the tan and if they are not all working then the tan that you get will not be as good. It is also much harder to determine out how long you should use the tanning bed for.

If you are buying the tanning bed bulbs in order to try and replace them yourself, then you should make sure that you have read the manufacturers instructions very carefully as there are different ways of doing things for each manufacturer. Even if you have replaced the bulbs on another type of bed, it doesn't mean that the one that you have now will be the same. It is also very important to make sure that you use the same tanning bed bulbs as were originally in the tanning bed. If you do not know which brand of bulbs they were, than you should read the manuals that came with the bed or contact the manufacturers. This is very important as the bulbs are not all the same and some are more powerful than others. This means that you could get a tanning bed bulb that is not powerful enough for your bed and does not give you the right amount of tanning or you could get one that is too powerful and you could get burned.

Although it is possible to buy spare bulbs from the manufacturers this can be a very expensive way of doing it. If you can find out what size the bulbs are and what the rating is, then you can usually get the tanning bed bulbs much cheaper from other manufacturers. The ones that are supplied by the makers are usually more expensive but it is worth checking into if you do not have a store that is local that can supply the bulbs to you.

Replacing tanning bed bulbs is not a hard job, but it is important to make sure that you get the right bulb that is the right power for your bed. If you are not confident then just ring the manufacturers and they will tell you what bulb to use or give you the address of a local supplier who can get them for you.